Banner printing is available with several different finishing and printing options
, depending on how and where you will hang your banner. Standard indoor banners printed on our regular, 13 oz. vinyl material usually do not require any of the additional banner options.
option is best for any banners that will be used outdoors, as these will endure weather conditions over an extended period of time, as well as any banner that is larger that is 4’x8’. When you select the “Outdoor” option, we fold 0.75" of media over each edge and then stitch the material together to make a strong, finished edge. This helps reinforce the grommets and prevents tearing during extreme weather conditions or heavy wind.
Pole Pocket finishing is best for banners that will be suspended in a banner stand or attached to poles. Pole pockets can be placed on the Top, Top and Bottom, or Sides of your banner or backdrop. In your Order Notes, specify the diameter of the pole (1”, 2”, 3”, etc.), so that we know what size to make the pockets. Otherwise, your banner will be produced with 3" pole pockets as this is our standard procedure.
By selecting the “Double-Sided”
option, your design will be printed on two separate banners and then stitched or heat welded together, so that viewers can see your message from both directions. If your design has a directional arrow, we will adjust the file to make sure the arrows point the same direction. If you upload your own file and the front and back are to be different (including arrows), please contact us after the order is placed to submit a 2nd file.