Answer
Tip #1: Flatten Your Magnets Immediately After Delivery
Your car magnets arrive rolled up to protect them during shipping. This temporary position needs to be corrected before use:
The 24-Hour Rule: Place your magnets on a refrigerator door for at least 24 hours immediately after receiving them. This critical step allows them to flatten and re-magnetize properly after shipping.
Why this matters: Skipping this step can result in permanently weakened magnets that fail to adhere properly to your vehicle, leading to lost or damaged products.
Tip #2: Ensure Perfect Surface Contact - No Air Pockets!
The secret to maximum magnetic strength is perfect surface contact:
- Full Contact Required: The entire magnet must lie completely flat against the metal surface
- Avoid Obstacles: Never place magnets over protrusions like moldings, decals, or pinstripes
- Skip Recessed Areas: Don't apply magnets in curved or recessed vehicle sections
- Eliminate Air Pockets: Even small air bubbles under the magnet dramatically reduce adhesion strength
Apply from center outward: Start by placing the center of your magnet on the vehicle surface, then smooth toward the edges to push out any air.
Tip #3: Weekly Removal & Cleaning
To prevent moisture and dirt buildup between the magnet and your car door, it is recommended to Remove and Clean the magnet Weekly.
- Both the magnet and the metal surface should be cleaned with a mild detergent and wiped with a soft cloth or left to air-dry.
- After waxing and polishing, please allow at least two days for the wax to fully cure before reapplying the magnets.