Install Retractable Banner Stands

Installation Guides 1min Read

Thank you for purchasing a retractable banner stand from Signazon.com! We are providing you with the following care and installation instructions to ensure that your retractable banner is properly cared for so that it continues to look extraordinary for its full life.

Check All Parts:

Your retractable banner stand will arrive with a pre-assembled retractable base, collapsible support pole, one tightening screw and one aluminum bar. One person can assemble the stand on a flat, level surface.

Step 1

Attach the Velcro along the top of the banner to the aluminum bar. If you did not order a banner with your stand, Velcro strips are still supplied and can be found on both the aluminum bar and the retractable vinyl within the base. Place the pressure-sensitive adhesive squarely along the top and bottom of your banner to connect it to the stand and aluminum bar.

Step 2

Screw the end of the support pole onto the base until it is secure.

Step 3

Raise the banner SLOWLY to ensure you do not stretch or damage it. Place the aluminum bar over the top of the support pole.

Step 4

Use the tightening screw to attach the aluminum bar to the pole.

Step 5

To adjust your banner’s height, raise the pole to the desired height. Flip the clamp on the pole towards the banner to lock it into place. If the clamp extends away from the pole, it is unlocked.